Tungsten Alloy Tennis Racket Balance Weights
Tungsten alloy is right material for tennis racket balance weight or the like to change the swing force and impact center known as the "sweet spot" on a tennis racket balance weight and more particularly relates to a snap-on weight that can be easily attached or removed.
"Sweet spot". But, size, weight, height, strength and other physical factors cause different players to alter the fundamental swing slightly causing "miss-hits" which in turn cause errors in the flight of the ball. A miss-hit, such as contacting the ball near the frame of the racket, will cause the ball to go in the direction different from where it is intended when the player swings.
Tungsten racket balance weight placed in certain areas of head can increase the force at which the player can hit the ball. Thus, even the best players can benefit from using tennis racket balance weight head.
"Sweet spot". No two players have identical swings and therefore two different players may swing slightly different with the same racket. Further, since the tennis racket balance weight and overall structure is fixed while it is made; the only way to achieve a different arrangement is to obtain a racket having a different weight or weight distribution. It would, however, be advantageous if weights could be easily added at selected points of the racket that would improve a players overall swing. Selected distribution of tennis racket balance weight can be used to not only increase the head tennis racket balance weight for a more powerful serve but also to correct for imbalances in a players swing.
"On" improving accuracy and power that increases the speed and control of the ball. One such method of adding weight is by tape on the inside surface of the frame. However, a disadvantage of this method is that it must be done when re-stringing the racket and the weight cannot be repositioned without removing and replacing the strings.
It is, therefore, one object of the present product to provide a snap-on weight for tennis rackets that allows a player to vary the weight distribution of a tennis racket balance weight. The position of the tennis racket balance weight can be changed at will.
Snap-on tennis racket balance weight, will allow a player to easily vary the amount and distribution of weight of the tennis racket balance weight head. The present product provides weights in the form of snap-on weighted clips that conveniently attach to the strings or frame of the racket head at selected positions around the racket.
A snap-on weight has a weight holder having a crown with slots at either end of an oblong portion terminating in bores that are approximately equal to the diameter to of strings of most tennis rackets. The length of the crown is slightly longer that the space between adjacent strings. The weight holder has short centrally located sleeve providing a cup or socket for receiving a weight such tungsten pellet. The weights can be small tungsten pellets that are pushed into the socket and firmly held in place by nibs on the weight or by closing the pocket with a covering portion. Tungsten pellets can be provided in varying weights to allow the amount of weight added to a particular portion of the tennis racket to be varied.
The weighted holder is attached to the tennis racket by fitting an adjacent string into the slots on either side of the crown until the strings engage the bores and are locked on the tennis racket string. The weight can then be slid down on the strings until the small sleeve having the weighted socket is firmly abutting the inside surface of the frame forming the tennis racket head. The weight holder is made of a soft resilient synthetic or rubber like material. The amount of tungsten racket balance weight added to a tennis racket head can be varied by adding the weighted holder at various positions around the periphery of the frame securely attached to the tennis strings.
No comments:
Post a Comment